Building Supplies |
|
|
Your Cart Contents: Number Items: 0 SubTotal: $0.00 |
|
| @ | |
System Three Epoxy --All of our kits come with enough epoxy for most of our customers to complete their boat. However, should you need more due to spillage, waste, or just want epoxy for other projects, we offer the kits below of resin/hardener in their proper 2 to 1 ratio. Note: We ship "Medium" hardener with our kits. You may order "Slow" (for hot climates) or "Fast" (for cold climates) upon request. Read your System Three Epoxy Book to help select a hardener. If you would like a copy of the Epoxy Book click the image to the right to download. |
 |
 |
1-1/2
Pint Epoxy Kit $29.50 |
|
1-1/2 Pints of System Three epoxy, |
||
 |
1-1/2
Quart Epoxy Kit $48.00 |
|
1-1/2 Quarts of System Three epoxy, |
||
 |
3
Quart Epoxy Kit $85.75 |
|
3 Quarts of System Three epoxy, |
||
 |
1-1/2
Gallon Epoxy Kit $129.25 |
|
1-1/2 Gallons of System Three epoxy, |
||
|
Hardener Only Pint $18.50 Quart $29.50 Half Gallon $56.25 Gallon $73.00 |
||
This is the general purpose laminating hardener. Select Fast for Low Temperatures, Medium for Normal Temperatures or Slow for High temperatures. |
||
|
Resin Only Pint $18.50 Quart $29.50 Half Gallon $56.25 Gallon $73.00 |
||
This is the general purpose laminating resin. |
||
 |
Silver Tip Epoxy |
|
SilverTip Laminating Resin is a medium-low viscosity epoxy system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. It has superior wet-out characteristics with little tendency to foam or trap air. Both the resin and hardener are nearly colorless and are used in an easy 2:1 ratio. The working time is longer than most boat building epoxies without sacrificing cure time. We offer this an an option in our boat kits. NOTE: This item can only ship UPS ground. Please plan accordingly. |
||
 |
Epoxy Pumps |
|
These are the same pumps that are included in our kits. The pair includes a 'restrictor' to reduce, by half, the volume of the hardener. |
||
 |
Foam
Rollers $3.50/Pair |
|
1/8" thick "nap" no-lint foam rollers, for laminating fiberglass with epoxy. Note: Thicker foam rollers can leave bubbles in your epoxy! Only use 1/8" foam rollers. |
||
 |
Rollers Frames |
|
These frames work with the above rollers covers. The roller covers can be cut in half and used with the 3 inch frame for smaller jobs or tight places. |
||
 |
Marine
Goop $6.00 |
|
An excellent adhesive & sealant for hatch foam and knee brace installation. 3.7 ounce tube. NOTE: This item can only ship UPS ground. Please plan accordingly. |
||
 |
System
Three Spar Urethane Varnish $28/Qt. $86/Gal. |
|
System Three Spar Urethane Varnish is a high-solids finish designed for marine use. The varnish contains ultraviolet light absorbers, which offer excellent protection from sun, salt air and water. NOTE: This Item can only ship UPS ground. Please plan accordingly. |
||
 |
System Three WR-LPU $51/Qt. $134/Gal. |
|
System Three's Water reducible linear polyurethane rivals solvent-based coatings in durability and weatherability. It contains ultraviolet light absorbers for maximum life in the sun. Harder to apply by hand than varnish, but when sprayed yields excellent results. Includes cross linker. |
||
 |
Z-Spar Flagship Varnish $37/Qt. $111/Gal. |
|
Flagship Varnish combines superior gloss retention and
the highest ultra violet protection available. It can be built up to
many coats for a deep, rich mirror-like finish. |
||
 |
Z-Spar 120 Thinner $17 |
|
Z Spar / Pettit T-10 120 medium brushing thinner is
designed for spraying in hot weather and brushing in most conditions. This
is a general purpose thinner used in most paint products for ease of
application when brushing.. |
||
| Picture not available |
Graphite Powder |
|
Graphite Powder can be added to epoxy to give a black, abrasion resistant coating to the bottom of your boat. Applied to a finished boat. |
||
 |
Drip Rings |
|
Drip rings keep water from your paddle blade blade off of your lap. All of our paddles include drip rings. We carry these for people who wish to make their own paddles. |
||
 |
Ferrule |
|
Stainless steel paddle ferrule for creating your own paddle. Adjustable to 0, 65 and 90 degrees. |
||
 |
Keepers Footbraces |
|
These footbraces are standard with our kits. Includes two 15" rails, two foot pads and mounting hardware. |
||
 |
Cabinet
Scraper $7.50 |
|
By Sandvik of Sweden. A tempered steel edge tool, handy for removing drips from partially cured epoxy. Size 6" x 2.5" |
||
 |
Curved Tip Syringes $1.05/Each |
|
Used to inject epoxy into seams. Note: if you immediately plunge/clean your syringes with acetone after use, you can re-use these many times. Keep the acetone sealed in a small glass jar and re-use many times. |
||
 |
Vinyl Gloves |
|
Work Cleanly! Wear Gloves! |
||
 |
Wood
Flour |
|
We sell 1.5 quart bags of wood flour, used to thicken epoxy for fillets and seam ends. (included in full kits) |
||
 |
Fiberglass Cloth |
|
Six ounce 38' wide plain weave "E" glass. This cloth is exclusively manufactured for us by Hexcel. Only one loom is used and the entire run is supervised by one person for highest quality control. |
||
 |
Fiberglass Tape 4 oz |
By the yard
By the roll |
This 4 ounce 1.5 inch wide tape is produced specifically for Pygmy. You won't find it anywhere else. It has excellent wet out properties. This is the tape used for joining panels to their full length. |
||
|
|
Fiberglass Tape 6 oz |
|
1.5 inch wide tape. This tape is available by the yard or in three roll sizes. This tape is used for taping keels and the under side of deck seems. |
||
|
Your Cart Contents: Number Items: 0 SubTotal: $0.00 |
|